SD-WAN: Power Router 1 firmware

Modified on Wed, 03 Feb 2021 at 09:53 PM

Version 2.50 of Power Router 1 ("PC Engines ALIX" boards)


Addendum: notes if using older "ALIX1" boxes...

[WAN2] [WAN1] [LAN] The NIC ports are opposite to the newer APU3 boards - LAN port is far-right, WAN 1 in middle, WAN 2 on far left (if a multi-WAN unit).

Factory reset IP & password different. If you reset to factory defaults then the LAN IP may revert to 192.168.3.100 (not .17) and the admin password may revert to admin (not Bonding123)

Storage card is CF flash, not SD card. You will need a 1GB or larger CF card. You can download the image file here to flash a blank card yourself (image taken from Alix 2d board running v.2.50 firmware).

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article